TVリモコン - 赤外線リモコン -

It is a TV remote control app for handsets equipped with infrared remote control function in Android4.4 or later.

Android4.4 is the remote control app for TV for terminal equipped with infrared remote control function in the following.

※ LG made of terminal it may not work, even if it meets the operating conditions (LGL22 was NG)

Simple, normal, there are three modes of macro.

Simple mode does not have minimal buttons on terrestrial digital broadcasting only.

Normal mode is many modes of most number of buttons.

Macro mode becomes a three-digit number of BS and CS by selecting the desired channel from the channel list to be entered at the touch of a button,

Terrestrial digital and BS can also be displaying the program name in the broadcast ("G guide. TV kingdom" depends on the RSS of)

Compatible TV Studio: Sanyo, Sharp, Sony, Toshiba, Pioneer, Panasonic, JVC, Hitachi, Mitsubishi

Repeat takes effect only volume button and the channel selection buttons.

■ About setting in macro mode

Saki Press mode

Digital terrestrial, BS, and outputs a signal of each button at the stage of pushing the CS button to output the signal of the 3-digit number buttons and button after channel decision. (Digital terrestrial, BS, if switching of CS is required must have towards the terminal on the TV in the step of displaying the channel list)

Even during the earlier press mode to output from the corresponding broadcast wave button when you press and hold.

Digital terrestrial, BS, when switching of CS, and not put some time because it is so free up time because it seems which it may Torikobosu the next signal, if earlier press mode is that you press the case of OFF and long I think the reaction is feel dull.

CS2 because button is CS and CS2 is not determined until after the channel decision if no effect ahead and push mode is even ON.

Interval

This is the input speed such as a three-digit number.

Because it seems there is quite a difference in reaction rate by TV, please increase the numerical If so Torikobosu the signal.

Interval 2

The same number at the time of three-digit number input is the interval of the case to continue.

Interval 3

It is a digital terrestrial, BS, CS button is pressed during the interval.

• Adding channel, edit

And you can change the channel number or add a channel adjacent prefecture.

If you want to add your own channels of cable TV, change the channel name and channel number by adding the appropriate channel of the same area, please service ID to 0.