Torque Plugin for Perodua cars

This is a Torque Pro plugin for Perodua cars. Read parameters in real time..!

This is a Torque plugin for Malaysian made Perodua cars, particularly older cars which does not support generic OBD protocols. Read real time data, read error codes.!! (for use as Torque pro plugin, this version only supports perodua 1.3 engines)

This is the free version with limited sensors/parameters and features. More parameters (a lot more..!) and features are available in the paid version, soon to be released. Make sure you watch this space...!

In the meantime try this free version and please revert to me for issues. My email address as below.

Prerequisite:

1. Now this app has its own standalone application while being a Torque plugin. You need to get Torque Pro installed in your device in order to use it as a plugin. Please note that you need to launch Torque Pro from this PeroduaOBD app, so that the plugin service can start properly.

2. You need ELM327 compliant adapter. Make sure you do not use ELM327 version 2.1 which does not support k-line communications. Get adapters confirmed to work from me or from ahmad hamidon (you can get it from http://bit.ly/obd2malaysia ).

3. Please also make sure you follow the instruction below. And make sure connection to ECU is OK before scan error, erase error or check the status to avoid app crashes.

Important notes..!

Later versions of android, for saving battery life, there is phone setting to stop apps from starting automatically. Please ensure you have set this plugin to autostart. The same thing will need to be done if you have autostart manager in your device.

Typically, the settings are in battery settings of the device.

Installation procedures:

To use this app as plugin to Torque Pro, it is important to launch Torque Pro from this app. This is to allow the plugin service to start. If you start Torque Pro from outside this app, it may not work. Then follow instruction below:

New vehicles with new engine such as Axia does not require any setup. Vehicles with older engines are supported by this plugin and requires special setup as below:

1. This plugin requires full access to OBD device. Check the 'Allow plugin full access' in Settings --> Plugins

2. For 1.3 litre engines or smaller, create a new vehicle profile in Torque. Under Menu, select 'Vehicle Profile'. then click 'create new profile'...,

3. Name the profile 'PERODUA1.3'. Scroll to the bottom and click 'Show advance settings'

4. Scroll to the bottom. For 1.3 litre engines, in 'Preferred OBD Protocol' select 'ISO 14230(fast init,10.4baud)'

5. Click 'Save'"

6. For 1.5 litre engines, it is under testing and not yet supported in this published version, it will be soon..! Watch this space..!

7. Create another vehicle profile and name it 'Blank' scroll to the bottom and 'Save'. Do not put any advanced settings

8. Select the correct Perodua vehicle profile you created earlier everytime you want scan by tapping on Menu --> 'Vehicle Profile'-->select the ones that you created. For other vehicles, use the 'Blank' profile.

9. Create custom PIDs from Settings --> Manage extra PID/Sensors --> tap settings and select 'Add predefined set'. Select 'Perodua PIDs

10. Create displays in 'Realtime Information' by tapping Realtime Information --> go to empty page -->tap menu --> Add display -->pick your meter type --> Select PIDs that start with {PERODUA}.

11. Make sure you go to this page every time you want to use Perodua cars. Otherwise, Torque wouldn't connect to your ECU. You may need to wait for a while at this page for Torque to connect to your car

12. Now you are ready to use the Torque for scanning your car.