Shrike Controller

Controlador CNC de cinco ejes.

About Shrike Machine Controller

Use your smart phone to stream G-Code to your Shrike Machine for Customized GRBL Firmware.

Features:

* Supports Bluetooth and USB OTG connection.

* Supports Real time feed, Spindle Speed and Rapid Overrides.

* Simple and Powerful Jogging Control.

* Dual Color Jogging Buttons for Accurate Jogging

* Supports 5 Axis Jogging Control.

* Real Time Machine Status Reporting (Work Position, Machine Position, Feed, Spindle Speed, Buffer State).

* Supports Sending G-Code Files Directly from Mobile Phone. (Supported Extensions are .gcode, .nc, .ngc and .tap, . G-Code files can be Placed Anywhere in the Phone or External Storage).

* Supports Short Text Commands (You can send G-Code or GRBL Commands Directly from the Application).

* Supports Probing (G38.3) and Auto Adjusts.

* Manual Tool Change Support with G43.1

* Four Highly Configurable Custom Buttons which Supports Multi line Commands (Supports both Short Click and Long Click).

* Application can Work in Background Mode, by utilizing the Less Resources, there by Consuming Less Power.

* Haptic Feedback (Enables Short Vibration when Buttons are pressed)

* User can Enable and Disable Vibration from Setting Tab.

Probing Tab:

* Use M7 command to Turn Probing on & M9 to Turn Probing off.

* Use 6mm Probing Tool for Accurate Offset.

* 5 Probing Buttons for Corner, Center & Tool Height Offset.

* Push and Play Corner Probing no need to Add Parameter for Offset.

* For Inside center Probing user have to Measure inside Dimension of Work piece & put Length and Width of Work piece.

* For Outside Center Probing also user have to Measure Outside Dimension of Work piece & put Length and Width of Work piece also Z-Min (Accurate Value in Negative Direction) Z-Max (Clearance Value in Positive Direction).

* Use Tutorial Link for more Information about Probing.

Requirements:

1. Bluetooth enabled or USB OTG Supported Smart Phone with Android Version >= 4.4 (Kit Kat or above).

2. Shrike machine Customized GRBL Firmware

3. Bluetooth Should be Already Paired with Smart Phone.

4. USB OTG Adapter.

NOTES:

1. For Any Type of Help Please Send Direct E-mail on given E-mail Address. We can't Provide Any Type of Support in Google Play Store Comments.

2. On Android Versions "Marshmallow" or above, use your OS Permission Manager and Grant "Read External Storage" Permission in order to get File Streaming Working.

3. G-Code Files can be Placed Anywhere in the Phone Memory or External Storage, but they must end with one of the Supported Extensions .gcode or .nc or .tap or .ngc

4. To get the Application Work in Background without Any Issues, You Should Disable Power Management (If Applicable) for This Application.

5. Homing is Highly Recommended When Tool Change or Any Connect Disconnect Event Appears.

6. Do not Turn Probing on When Machine on Run State.

7. Use Larger Step Size for Rapid Jogging.

8. Jogging Buttons are not Accurate for Machining so use Short Command for Nice Surface Finish.

9. For the short arc movement we recommend USB communication.